Açıklama:• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Meet DIN862
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• Resolution: 0.01mm
• Buttons: on/off, zero, ABS
• Absolute and incremental measurement
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Meet DIN862
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Meet DIN862
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• Carbide tipped jaws for inside and outside measurements
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Meet DIN862
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• Buttons:
• Absolute and incremental measurement
• Battery CR2032, automatic power off
• Data output
• Meet DIN862
• Made of stainless steel
• Resolution: 0.01mm, 0.0005", 1/128"
• Unit (mm/in/fraction), ABS, on/off, zero
Açıklama:• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
----------------------------------------------------------------
• Resolution: 0.01mm/0.0005"
• Button function: on/off, zero, mm/inch, ABS, data preset
• Absolute and incremental measurement
• Battery CR2032
• Data output
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2))
----------------------------------------------------------------
• Resolution: 0.01mm/0.0005"
• Button function: on/off, zero, mm/inch, ABS, data preset
• Absolute and incremental measurement
• Battery CR2032
• Data output
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit t o turn on power
• Battery CR2032
• USB data output
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
----------------------------------------------------------------
• Resolution: 0.01mm/0.0005"
• Button function: on/off, zero, mm/inch, ABS, data preset
• Absolute and incremental measurement
• Battery CR2032
• Data output
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• Measure wall thickness of tubes
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• Measure grooves and recesses
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2) 
Açıklama:• Measure wall thickness inside bores and recesses
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2) 
Açıklama:• Measure groove diameter
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• Measure groove diameter
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2) 
Açıklama:• Pointed jaws fit into small grooves and recesses
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• The blade jaws fit into small grooves
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• Measure diameter of deep step holes
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• Measure hole center distance in the same or offset planes
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• The left jaw can slide up and down to facilitate measurement of stepped sections
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• The left jaw can slide up and down to facilitate measurement of stepped sections
• Made of stainless steel
• Stain chrome plated reading surface
Açıklama:• The carbide-tipped jaws facilitate scribing on workpieces
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• Measure width of groove inside bores
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• Resolution 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Measure thickness of disk brakes
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Measure thickness of disk brakes and pad wear
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• Mea ure internal and external diameter of drum brakes
• Resolution 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• Resolution: 0.001mm/0.00005"
• Micrometer head accuracy: +/-3μm
• Rod accuracy: +/-(2+L/75)μm, L is the measuring range in mm
• Button function: on/off, set, mm/inch, ABS/INC, data output
• IP54 dust/waterproof
• RS232 data output
• SR44 or LR44 battery, automatic power off
• Rods with flat end
• Optional accessory: SPC cable (page A1-A2)
DIGITAL OUTSIDE MICROMETER WITH INTERCHANGEABLE ANVILS
Marka:INSIZE
Kod:3506-100A--3506-400A
Uygulama:Unit:mm
Açıklama:Resolution 0.001mm/0.0001"
(resolution of 3506-100A and 3506-150A is 0.001mm/0.00005")
IP54 dust/waterproof
Button function: on/off, set, mm/inch,
ABS/INC, data output
RS232 data output
SR44 or LR44 battery, automatic power off
Carbide measuring faces
Supplied with setting standards
Optional accessory: SPC cable (page A1-A2)
Açıklama:• Measure the web thickness of drills, small grooves and keyways
• Graduation 0.01mm
• Ratchet stop
• Carbide tips
• Supplied with setting standards(except 0-25mm)
Açıklama:• Measure the outside diameter of cutting tools(such as taps, reamers, end mills) with 3 or 5 flutes
• Graduation 0.01mm
• Ratchet stop
• Carbide measuring faces
• Supplied with setting standards
Açıklama:• Measure tube thickness, shoulder edge distance, rivet head height, etc.
• Supplied with flat anvil and rod anvil
• Graduation 0.01mm
• Ratchet stop
• Carbide spindle tip
• Setting standards are included(except 0-25mm)
Açıklama:• Graduation 0.005mm
• Each micrometer has two sets of interchangeable
• jaw for different measuring ranges
• Carbide measuring faces
• Ratchet stop
• Supplied with extension rods
• Optional accessary: setting ring(code 6312)
Açıklama:• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Supplied with zero set surface
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Measure depth of small groove and hole, also measure depth of tire thread
• Made of stainless steel
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• To increase the stability of depth measurement
• Suitable for 0-150mm and 0-200mm of vernier calipers, digital calipers and dial calipers with beam width 16mm
• Made of stainless steel
Açıklama:• Graduation: 0.01mm
• Micrometer head accuracy: +/-3?m
• Rod accuracy: +/-(2+L/75)?m,
• L is the measuring range in mm
• Rods with flat end
• Ratchet stop
Açıklama:• Graduation: 0.01mm
• Micrometer head accuracy: +/-3?m
• Rod accuracy: +/-(2+L/75)?m,
• L is the measuring range in mm
• Rods with flat end
• Ratchet stop
Açıklama:• Reading in digit and analog
• Display can be rotated by 320º
• Button function: tolerance Go and No-Go display, data preset, measuring direction change, max./min./range measurement, inch/metric conversion, absolute/incremental measurement
• CR2032 battery, automatic power off
• USB data output
• Optional accessory: SPC cable (page A1-A2 ), backs (page F15), contact points (page F11-F14)
Açıklama:• 10FSpecially designed for bore gauges
• The minimum value tracking function can find the diameter automatically
• Read the diameter directly, after imputing the size of setting ring
• Reading in digit and analog
• Display can be rotated by 320º
• Button function: minimum value tracking, calibration, data preset, inch/metric conversion, absolute/incremental measurement
• CR2032 battery, automatic power off
• USB data output
• Optional accessory: SPC cable (page A1-A2 ), backs (page F15), contact points (page F11-F14)
Açıklama:• Reading in digit and analog
vDisplay can be rotated by 320º
• Button function: tolerance Go and No-Go display, data preset, measuring direction change, max./min./range measurement, inch/metric conversion, absolute/incremental measurement
• CR2032 battery, automatic power off
• USB data output
• Optional accessory: SPC cable (page A1-A2 ), backs (page F15), contact points (page F11-F14)
Açıklama:• Jeweled bearing
• Supplied with limit hands
• 1mm and 2mm are supplied with bezel clamp, 3mm and 5mm are not supplied with bezel clamp
• Optional accessory: backs(page F15), contact points(page F11 F14) eweled bearing
Açıklama:• Jeweled bearing
• Carbide contact point
• Two measuring directions
• Anti magnetic body
• Optional accessory: styli (page F18)
• Supplied with two clamps: diameter Ø4mm and Ø8mm
Açıklama:• Stainless steel base
• Extension rods: 25mm(1pc), 50mm , 75mm , 100mm(2pcs)
• Mode button : to track the minimum or maximum reading button: to change measuring direction
• CR2032 battery, automatic power off (1pc) (1pc)
• Supplied with pointed tip and ball tip
Açıklama:• To increase the stability of depth measurement
• Suitable for 0-150mm and 0-200mm of vernier calipers, digital calipers and dial calipers with beam width 16mm
• Made of stainless steel
Açıklama:• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch, ABS/INC, data hold, TOL, set
• ABS/INC is for absolute and incremental measurement
• TOL is for tolerance measurement
• Carbide tipped scriber
• Made of stainless steel (except the base)
• SR44 or LR44 battery
• Data output
• Supplied with clamp
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• Dial indicator graduation: 0.01mm
• One counter reads in the plus direction and another in the minus direction, so incremental measurement can be made in either direction
• Carbide tipped scriber
• With driving wheel
• Made of stainless steel (except the base)
Açıklama:• Graduation: 0.02mm/0.001"
• Adjustable main scale to set zero
• Carbide tipped scriber
• Satin chrome plated scale
• Supplied with magnifier
• With fine adjustment
• Made of stainless steel (except the base)
Açıklama:• Reading in digit and analog
• Display can be rotated by 320º
• Button function: tolerance Go and No-Go display,
data preset, measuring direction change,
max./min./range measurement, inch/metric
conversion, absolute/incremental
measurement
• CR2032 battery, automatic power off
• USB data output
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• Reading in digit and analog
• Display can be rotated by 320º
• Button function: tolerance Go and No-Go
display, data preset, measuring direction
change, max./min./range measurement,
inch/metric conversion, absolute/incremental
measurement
• CR2032 battery, automatic power off
• USB data output
• Optional accessory: SPC cable (page A1-A2)
Açıklama:• Measure radius of internal and external arcs
• Supplied with 5 jaws for different sizes of arc
• Battery CR2032
• (*R is the radius to be measured)
Açıklama:• Buttons: ON/OFF, ZERO
• With clamping screw to lock the blades
• Graduation of blade: 1mm and 1/32"
• CR2032 battery
• Automatic power off
Açıklama:Parallax-free reading
Supplied with 150mm blade
Made of carbon steel
Optional accessory: clamp(code 2372-CLAMP) suitable for
height gauges 1151 and 1351
Açıklama:• Center head:
• To locate center of round workpieces
• Accuracy: ±0.15mm
• Protractor head:
• To set the blade at desired angle to an edge of a workpiece, and can be used to measure angles
• Range: 0-180°
• Accuracy: ±7min.
• Square head:
• To set the blade at 90° or 45° to an edge of a workpiece
• Accuracy: ±8min for 90° square, ±10min for 45° square
• Blade:
• Range: 300mm/12",
• Graduation: 0.5mm and 1/32" on front face, 1mm and1/64" on back face
• Optional accessory: rigid rule(code 7113)
Açıklama:• Used as level and protractor
• The display panel can be set at a desired angle for easy reading
• Magnetic bottom with V-groove for shafts
• The sea level is permanently set inside the chip, zero setting is not needed when batteries are replaced
• Buttons: ON/ZERO, HOLD(keep the reading)
• Two AAA batteries
• Automatic power off
Açıklama:• Used as level and protractor
• Aluminum frame
• Magnetic bottom with V-groove for shafts
• Zero setting can be made on any plain surfaces
• Buttons: ON/OFF, ZERO, HOLD(keep the reading)
• CR2032 battery
• Automatic power off
Açıklama:• The base is electrically conducted to the cutting tools through the table and chuck, the LED lights up when the cutting tool
touches the anvil
• Magnetic base
• Battery LR44 or SR44
Açıklama:• The shank is electrically conducted to the metal workpiece through the chuck and table, the LED lights up and the beeper sounds(only for 6566-3), when the ball touches the workpiece
• Not suitable for rotary use
• Hardened shank and contact ball
Açıklama:• Hold cylindrical workpieces for inspection and machining
• Supplied in single piece
• Not hardened
• V groove on the top for large shafts
• V groove on the bottom for small shafts
• Not suitable for cast iron surface plates
Açıklama:• Hold cylindrical workpieces for inspection and machining
• Two V-blocks per set
• Surface A, B,C,D are hardened to HRC60±2
• Magnetic force on top, bottom and two V grooves
• V groove on the top for large shafts
• V groove on the bottom for small shafts
• Suitable for cast iron surface plates and granite surface plates
Açıklama:• Hold cylindrical workpieces for inspection and machining
• Supplied in single piece
• Not hardened
• Not suitable for cast iron surface plates
Açıklama:• Hold cylindrical workpieces for inspection and machining
• To be used on magnetic chucks
• Supplied in single piece
• V groove on the top for large shafts
• V groove on the bottom for small shafts
Açıklama:• Hold cylindrical workpieces for inspection and machining
• Two V-blocks per set
• Hardened to HRC60±2
• V groove on the top for large shafts
• V groove on the bottom for small shafts
Açıklama:• Hold cylindrical workpieces for inspection and machining
• To be used on magnetic chucks
• Two V-blocks per set
• V groove on the top for large shafts
• V groove on the bottom for small shafts
Açıklama:• Made of granite, free from deterioration or dimensional change over
time, minimal changes in dimension due to temperature changes
• Meet DIN876, grade 00 is for inspection room or lab, grade 0 is for workshop
• Supplied with calibration certificate
• Optional accessory: stand for granite surface plate(code 6902),
jack for granite surface plate (code 6903)
Açıklama:• 5 jacks per set
• Adjustable height
• For large granite surface plates:
2000x1000x220mm(code and )
2000x1500x250mm(code 6900-0202 and 6900-1202)
2500x1500x300mm(code 6900-0251 and 6900-1251)
3000x2000x400mm(code 6900-0302 and 6900-1302)
Açıklama:• Measure concave and convex weld sizes
• 7 blades are included
• Each blade measures two sizes of concave and convex weld
• Made of stainless steel
Açıklama:• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• USB data output
• Made of stainless steel
• Supplied with bracket to be mounted on the back
• Optional accessory: SPC cable(page A1-A2)
• Resolution: 0.01mm/0.0005"
• Button function: on/off, zero, mm/inch, ABS, data preset
• Absolute and incremental measurement
• Battery SR44 or LR44
• Data output
• Made of stainless steel
• Supplied with bracket to be mounted on the back
Açıklama:• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero set, mm/in, data set
• Battery SR44 or LR44
• Data output
• Made of stainless steel
• Supplied with bracket to be mounted on the back
Açıklama:• Push and pull test
• Peak(max.) or tracking work mode
• Units: kgf, N, lbf
• Low and high limits with judgement
• Maximum 10 memories
• Automatic power off
• Overload alarm
• RS232C output
• Built-in rechargeable battery
Açıklama:• For tensile and compress test with force gauges
• Both can be used in vertical and horizontal orientation
• ISF-MTD500 is supplied with digital scale(resolution: 0.01mm/0.0005")
Uygulama:Add suffix on code No. to devote AC voltage and plug (refer to page V1)
Açıklama:• Supplied with impact device D
• Based on Leeb(HLD) , converted to Vickers(HV), Brinell(HB),
• Rockwell(HRC and HRB), Shore(HS) and tensile strength(MPa)
• Connected with printer via bluetooth
• LCD display with backlight
• Automatic power off
• According to ASTM A 956
Açıklama:• According to ISO868, ISO7619, ASTM D 2240
• Optional accessory: hardness test block for ISH-SA(code ISH-BSA, page S13), testing stand(page S12)
Açıklama:• Based on Leeb(HL) , converted to Vickers(HV), Brinell(HB),
• Rockwell(HRC and HRB), Shore(HS) and tensile strength(MPa)
• Connected with printer via bluetooth
• Connected with computer via USB port
• Up to 800 test results can be saved
• Low and high limits with judgement
• Touch screen operation, large display with backlight
• Language: English, Chinese, Italian, German, French and Russian
• Automatic power off
• According to ASTM A 956
Açıklama:• Impact device D
• Automatic direction correction
• Connected with printer via bluetooth
• Connected with computer via USB port
• Up to 500 test results can be saved
• According to ASTM A 956
• Based on Leeb(HLD) , converted to Vickers(HV), Brinell(HB),
• Rockwell(HRC and HRB), Shore(HS) and tensile strength(MPa)
Açıklama:• For metallurgical analysis and high m
• Reflected and transmitted illumination can work at the same time
• Objectives 40X, 60X are spring type agnification observation
Açıklama:• For metallurgical analysis and high m
• Kohler illumination system provides uniform illumination field
• Objectives 20X, 40X, 100X are spring type
agnification observation
Açıklama:• Clockwise and counter-clockwise measurement
• Peak(max.) or tracking work mode
• Unit: kgf·cm, N·m, lbf·in
• Maximum 10 memories
• Average reading
• Low and high limits with judgement
• RS232C output
• Automatic power off
Açıklama:• Measure the thickness from one side of object, suitable for pipe, tank, etc.
• Applicable material: metal, plastic, glass, nylon, resin, ceramic, rubber, ice
Açıklama:Includes:
1) Digital indicator, range 12.7mm/0.5",
resolution 0.01mm/0.0005" (code 2112-10)
2) Flex arm
3) Locking pliers, adjustable jaw opening from 0 to 25mm
Açıklama:Includ :
1) Digital caliper, range 0-150mm/0-6",
resolution 0.01mm/0.0005" (code )1108-150
2) Digital outside micrometer, range 0-25mm/0-1",
resolution 0.001mm/0.00005" (code 3109-25A)
3) Digital indicator, range 12.7mm/0.5",
resolution 0.01mm/0.0005" (code 2112-10)
4) Magnetic stand (code 6201-60)
5) Micrometer stand (code 6300)