Açıklama:• Used as level and protractor
• The display panel can be set at a desired angle for easy reading
• Magnetic bottom with V-groove for shafts
• The sea level is permanently set inside the chip, zero setting is not needed when batteries are replaced
• Buttons: ON/ZERO, HOLD(keep the reading)
• Two AAA batteries
• Automatic power off
Açıklama:• Used as level and protractor
• Aluminum frame
• Magnetic bottom with V-groove for shafts
• Zero setting can be made on any plain surfaces
• Buttons: ON/OFF, ZERO, HOLD(keep the reading)
• CR2032 battery
• Automatic power off
Açıklama:• The base is electrically conducted to the cutting tools through the table and chuck, the LED lights up when the cutting tool
touches the anvil
• Magnetic base
• Battery LR44 or SR44
Açıklama:• The shank is electrically conducted to the metal workpiece through the chuck and table, the LED lights up and the beeper sounds(only for 6566-3), when the ball touches the workpiece
• Not suitable for rotary use
• Hardened shank and contact ball
Açıklama:• Hold cylindrical workpieces for inspection and machining
• Supplied in single piece
• Not hardened
• V groove on the top for large shafts
• V groove on the bottom for small shafts
• Not suitable for cast iron surface plates
Açıklama:• Hold cylindrical workpieces for inspection and machining
• Two V-blocks per set
• Surface A, B,C,D are hardened to HRC60±2
• Magnetic force on top, bottom and two V grooves
• V groove on the top for large shafts
• V groove on the bottom for small shafts
• Suitable for cast iron surface plates and granite surface plates
Açıklama:• Hold cylindrical workpieces for inspection and machining
• Supplied in single piece
• Not hardened
• Not suitable for cast iron surface plates
Açıklama:• Hold cylindrical workpieces for inspection and machining
• To be used on magnetic chucks
• Supplied in single piece
• V groove on the top for large shafts
• V groove on the bottom for small shafts
Açıklama:• Hold cylindrical workpieces for inspection and machining
• Two V-blocks per set
• Hardened to HRC60±2
• V groove on the top for large shafts
• V groove on the bottom for small shafts
Açıklama:• Hold cylindrical workpieces for inspection and machining
• To be used on magnetic chucks
• Two V-blocks per set
• V groove on the top for large shafts
• V groove on the bottom for small shafts
Açıklama:• Made of granite, free from deterioration or dimensional change over
time, minimal changes in dimension due to temperature changes
• Meet DIN876, grade 00 is for inspection room or lab, grade 0 is for workshop
• Supplied with calibration certificate
• Optional accessory: stand for granite surface plate(code 6902),
jack for granite surface plate (code 6903)
Açıklama:• 5 jacks per set
• Adjustable height
• For large granite surface plates:
2000x1000x220mm(code and )
2000x1500x250mm(code 6900-0202 and 6900-1202)
2500x1500x300mm(code 6900-0251 and 6900-1251)
3000x2000x400mm(code 6900-0302 and 6900-1302)